Ecovector® Low Fan Convectors

Ecovector® Low

Ecovector Low level fan assisted heaters provide warmth from the floor upwards and are more energy efficient and effective than radiators

  • The Ecovector can heat up a room more quickly than radiators, thereby reducing the amount of time your boiler or heat pump is running – making it extremely efficient and cost effective
  • Compatible with most types of wet central heating systems, functioning equally efficiently with conventional boilers, biomass technology or ground or air source heat pumps
  • Ideal for new and existing developments, due to ease of installation, the Ecovector is available in a range of models to suit varying room sizes and heat output requirements
  • Ecovector® Vertical is ideal for those hard to heat places, such as reception areas and alcoves
  • Ecovector® High is designed for rooms with limited lower wall space, such as shops and libraries

AC only

Front casing: zinc-coated steel.
Polyester powder-coated RAL 9010
Side panels: polymer eggshell white

Mounting bracket supplied
Unit must be earthed
Suitable for two-pipe central heating systems
Minimum height above floor level 150mm
Maximum height above floor level 500mm

Check water is hot enough to activate the selectable low temperature cut-out thermostat

Rocker switch – normal/off/boost
Built-in room thermostat
Low temperature cut-out thermostat set to energise fan at approximately 35°C

For technical data and ordering guides click here

The Smith’s technical sales team is available to offer free, no-obligation advice on the best heating solution for an almost exhaustive range of applications. Contact us