Caspian® (UV, SL, FF, TT, EXT) Fan Convectors

Caspian UV

Caspian SL

Caspian FF

Caspian TT

Caspian EXT

Fan convectors suitable for all kinds of commercial applications, from schools and churches to office developments, with the ability to rapidly heat large areas quickly with much greater efficiency than other heat emitters.

Caspian UV: One heating solution, suitable for high, low or ceiling mounted applications

Caspian SL: Warm air is discharged at an upward 45° angle to avoid causing discomfort to people sitting adjacent to appliance and with chamfered profile to avoid sharp corners

Caspian FF: Can be installed in an adjacent room, or storage cupboard, with the warm air outlets positioned at the rear of the appliance and ducted into the adjacent room such as a sports hall or even a narrow corridor, permitting an obstruction free wall space

Caspian TT: Warm air is discharged from the upper surface to avoid causing discomfort to people sitting adjacent to the appliance

Caspian EXT: Warm air is delivered at 1.7m from the base/floor level and the heater can be installed as a freestanding appliance

  • Caspian fan convectors are both a practical and high quality heating solution for any commercial project
  • Incorporating the latest EC motor technology, which can result in running-cost savings as high as 80%, and with variable speed control as standard, the Caspian delivers heat quickly and quietly.
  • AC motor models are available on request
  • Caspians are compatible with most types of wet central heating systems, functioning equally efficiently with conventional boilers, biomass technology or ground or air source heat pumps
  • The airflow can be reversed so that the warm air is discharged from the lower vent

Motor
EC (BMS compliant) or AC

Finish
Casing: zinc-coated steel 1.2mm
Polyester powdercoated: white RAL 9010
Available to special order in any colour and with anti-microbial or anti-bacterial paint

Filter
Class G3, 100% polyester, non-washable

Installation
Suitable for two-pipe central heating systems
Maximum installation height for high or ceiling mounting, 4m to underside
Pipework access holes on the rear and underside
Key operated front access panels
Bleed valve accessible on removal of front casing
Unit must be earthed

Commissioning
Check water is hot enough to activate the low temperature cut-out thermostat

Controls
Variable heat output controller (mounted within the products)

For technical data and ordering guides:
Caspian UV – click here
Caspian SL – click here
Caspian FF – click here
Caspian TT – click here
Caspian EXT – click here

The Smith’s technical sales team is available to offer free, no-obligation advice on the best heating solution for an almost exhaustive range of applications. Contact us

Mounting options